Windows Me fails to recognise 40Gb hard drive

  Nyali 18:04 26 Oct 2003

I have a maxtor 40Gb drive, it shows as 40Gb at start up and the bios reads it ok and is set to LBA mode but Windows Me shows it as only being 1.99Gb. How do I get windows to pick it up as 40Gb?

  DieSse 18:10 26 Oct 2003

Sounds like you've partitioned it wrongly.

2Gb is the partition size you get if you FDISK without saying YES to "Do you want to enable Large Disk support"

  graham√ 19:12 26 Oct 2003

Register at click here , it's free. Download MaxBlast Plus, make a floppy and boot with it.

  graham√ 19:23 26 Oct 2003

Strike that. Download from click here

  karl_a 10:14 27 Oct 2003

I think you have partitioned it wrongly as well. If you need to know how to do this, please e-mail me

  Taran 10:49 27 Oct 2003

Microsoft's page on FDISK and how to set up drives for different versions of Windows:

click here

The excellent "Radified" guide to using FDISK click here

Or as graham√ cirrectly points out, MaxBlast will do the whole process in moments, but a word of warning: drive overlay software like MaxBlast may be fast and very useful to certain tasks but should you ever need to format the partition again you can come badly unstuck, so whether you use FDISK or not from a Windows startup floppy disk, it's worth learning how to use it for future reference.



This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Moto G6 Play Review: First Look

iPad 9.7in (2018) review

Test : les écouteurs Bluetooth Honor xSport AM61