Sound when playing DVD

  Dave 18:01 29 Nov 2004
Locked

Recently bought combi cd/dvd player. Using Roxio player shows pictures but no sound. Do I need to connect the two pin spdif cable from the dvd played to the on board sound system? If so I have a problem as no SPDIF pins on M/B though shown in M/B Handbook board layout. M/B is ECS L7VMM2. Tried other suggestions shown in forum DVD Sound but with no results.

  alnwrd 19:02 29 Nov 2004

you have to connect the cable for sound from your cd/dvd drive. If you cannot find the right place on the motherboard, you could get a separate sound card and plug into that. IF you get a sound card, make sure you disable the onboard sound in the bios.

  Fruit Bat /\0/\ 19:38 29 Nov 2004

control panel - system - hardware -device manager- right click DVD drive - properties -properties tab - tick box enable digital CD Audio.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

iMac Pro review

Illustrator Charles Williams on how to create magazines and book covers

iMac Pro review

Les meilleures prises CPL (2018)