Replacing Hard drive - BIOS will not recognise

  spindlefox 13:14 23 Jan 2005

I am replacing an existing 12GB drive with a new Seagate 160GB drive in my ageing (1999)HP Brio P3. Whilst I can format this drive OK (as part of the Win2000 install or using a Seagate disk tool)I cannot boot from it. I think the problem is with the BIOS, it will not 'see' the new drive, even when using auto detect, but I am not sure how to go about upgrading it (if indeed this is the problem).
The BIOS is from Award version HW.27.01 (QHW.01.01) 3/01/99 on a HP Brio BAx system board D76xxA.

  Fruit Bat /\0/\ 13:29 23 Jan 2005
  spindlefox 13:51 23 Jan 2005

Thanks Fruitbat - can I take it you agree with my diagnosis? Also how do I install a BIOS upgrade, do I need any additional software other than the actual update?

  spindlefox 21:55 23 Jan 2005

Update - successfully updated BIOS to latest available for my PC but to no avail - still will not see new drive. Any other ideas? Or do I need to invest in a newer motherboard / processor to use this drive?

  phono 22:41 25 Jan 2005

Have you tried the drive capacity limitation jumper and drive overlay software to "fool" the BIOS?

See the Seagate site for more information.

  spindlefox 20:15 26 Jan 2005

Yes - with the jumper set to limit the drive size the BIOS did see the drive, but for some reason only as a slave (it is the only drive)! I have also tried the Seagate drive overlay software but with no joy

  phono 20:30 26 Jan 2005

Have you thought about an internal PCI IDE card? Although unless your BIOS allows you to alter boot options etc it you may not be able to boot from it, do some research on the Internet.

  JonnyTub 20:36 26 Jan 2005

try entering the hd info into the bios manually, i.e. cylinders, heads, etc, it should all be there on the hd itself.

  spindlefox 20:44 26 Jan 2005

Thanks all - I will give it a go

  phono 20:53 26 Jan 2005

Had a quick look on the Internet, there is an internal IDE controller at this link click here

From customer comments it appears that this card has an onboard BIOS and as such I think it should allow you to boot from it.

I'm not saying you should go ahead and buy this card but it is an example of what is available and perhaps if you contacted them they could confirm whether or not it would sort you out.

  spindlefox 20:58 26 Jan 2005

thanks again phono

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

iMac Pro review

Illustrator of witty, relatable Instagram comics Julia Bernhard touches on our humble moments

iMac Pro review

Quelle est la meilleure application de podcast pour Android (2018) ?