Problems reading SD cards

  Pineman100 11:54 17 Feb 2012

My Windows 7 laptop has an SD card reader slot that I use regularly (I am a photography enthusiast). Recently I've been having trouble getting the slot to recognise a card when it's plugged in "hot". Normally, plugging in a card would - after a few seconds - open up the Autoplay menu, and the card could then be opened in Windows Explorer.

Recently, however, when I plug in a card, nothing happens. I get lots of activity on the HDD drive light, and an intermittent hourglass against the cursor, but Autoplay fails to open. When I click on the drive letter in Windows Explorer, it asks me to insert a disk, even though the card is already plugged in.

However, if I plug in the card then restart the computer, I can then access the card successfully in Windows Explorer.

I've tried several different SD cards and the problem is the same with all of them.

Any ideas on how I can get hot-plugged cards recognised, please?

  Pineman100 12:04 17 Feb 2012

One further thing that I've noticed since posting this problem. When I want to remove an SD card from the reader, my normal procedure is to right-click on it in Windows Explorer, then click on "Eject".

Now when I do this, I get a report that "the drive (F:) is currently in use", even though it's not. I guess this is a symptom of the same problem.

  Pineman100 16:16 17 Feb 2012


  Fruit Bat /\0/\ 16:19 17 Feb 2012

Uninstall and reinstall the card reader is my first choice.

However I'm willing to bet its connected by USB header to the motherboard, have a look in device manager make sure you tick Show Hidden Devices - these will come up in light grey - uninstall all instances of the card reader before doing a scan for new hardware then windows should find and reinstall it.

Lots of instances of the same driver occurs with devices that are regularly plugged in and out, after a while they start to clash causing the symptoms you have described.

  Pineman100 16:41 17 Feb 2012

Many thanks for your response,Fruit Bat /\0/.

I've looked in Device Manager and found two devices that might be the card reader - I wonder if you could please tell me which to reinstall.

Under Disk Drives there is an entry for "Generic Multi-Card USB Device".

Under Portable Devices there is an entry for "F:\" This is the drive letter that is always allocated to the SD card.

Which of those should I uninstall/reinstall - or should I do both?

  Fruit Bat /\0/\ 17:24 17 Feb 2012

Do both windows will reinstall if you reboot or Use Action - scan for new hardware

  Pineman100 17:31 17 Feb 2012

Thanks for that. I'll do it and report back.

  Pineman100 18:18 17 Feb 2012

Success! I started by uninstalling the Generic Multi-Card USB Device and found that, when that disappeared from my Device Manager list, drive F: disappeared too.

I then scanned for new hardware and reinstallation took seconds. The card reader is now behaving normally.

Huge thanks as always, Fruit Bat /\0/. Goodness knows how many scrapes you've got me out of, over the years!

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

iMac Pro review

Why this awful City of Los Angeles job ad for a graphic designer is actually brilliant

iMac Pro review

Les meilleures prises CPL (2018)