print error message

  artypants 06:29 26 Jan 2013

Hi, my Epson Stylus photo RX620 is telling me that servicable parts are due for service and refer to manual, manual says contact manufacturer, can I fix it? I think it might be because of full (or not) reservoir. Thanks for reading.

  Fruit Bat /\0/\ 09:25 26 Jan 2013

I think it might be because of full (or not) reservoir.

Yes probably the case - needs emptying and cleaning and resetting reset tool here

Be extremely careful so as to not damage any of the data cables.

Remove the control panel then the scanner assembly.

Disconnect all cables from the circuit board

(you may have to remove the board), and unscrew and lift off the upper housing. They are all held by visible screws and tabs.

Then remove the sheet feed assembly (don't forget the screw on the underside and on the left by the gear assembly.

Remove all screws holding the printer to the lower case (two screws are hidden under the scanner hinges).

Next disconnect the drain tube coming off the pump. Finally remove the printer mechanism.

The waste ink pads are now clearly visible.

Waste ink tube pictures

Its easier just to reroute the waste ink tube to a waste bottle and reset the counter like this

  artypants 10:43 26 Jan 2013

Wow! thanks for that, you might just have saved my sanity.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

iMac Pro review

Illustrator of witty, relatable Instagram comics Julia Bernhard touches on our humble moments

iMac Pro review

Quelle est la meilleure application de podcast pour Android (2018) ?