panel conections

  1x11456 13:33 05 Oct 2004

i have just got a pc chips m/board m811lu as a comp for the grandkids and i have a problem rewirering the front panel as it wont start up ( no power)
pin 1/3 hdd led
pin 2/4 msg led (dual color or single color +)
pin 5/7 reset sw
6/8 power switch
9 reserved
10 no pin
i have the reset and hdd led set ok but i have tried the power sw and the power les on pins 6/8 and no power is there sonthing else iam missing yes i have chesked the fuse as i swoped the monitor cable..thanks in advance.. :-)

  [DELETED] 14:17 05 Oct 2004

I think you will need a copy of the Mobo manual. This will tell you the configuration of the pins and voltage. If posssible though there might be little markings on the Mobo itself to show you what goes where.
My power supply messed up so changed the case and I to had trouble getting it back connected, as i had not written down the configuration for the reset/on-off switch and hdd and power led's.
It was a case of trial and error till I got it right. The double connector pins may not align to just 1-2 3-4 and so forth, they may bridge between pins 1-3 2-4 if you get what I mean.
Good luck

  1x11456 14:31 05 Oct 2004

just to update i had a phone call from a buddy and he said try moving the cmos pins so i did and bingo everythings working

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

OnePlus 6 review

Best art and design exhibitions in 2018

MacBook Pro keyboard issues and other problems

E3 2018 : dates, conférences de presse, billets et plus