Home Forums Tech Helproom No hot water for the bath Forum Rules | Contact Forum Editor | Report a Post No hot water for the bath Samantha bowler 10:58 21 Sep 2018 Locked Hi I have a Danfoss TP9000 and I can’t get hot water for the bath even though the rest of the house is red hot lotvic 12:27 21 Sep 2018 You have to program it to heat the hot water, look inside the flap for instructions. Govan1x 22:41 22 Sep 2018 Strange one. Does the hot water taps work ok in the kitchen. If not follow lotvic's advice. Govan1x 22:47 22 Sep 2018 Maybe listen to this for directions on how to turn hot water on. Click Here Forum Editor 11:43 23 Sep 2018 You don't say how long you have had this programmer - has it worked properly in the past? If it has, and the programmer is set to provide hot water when the system calls for it, you may have a problem with a motorised valve - either the valve is sticking, or the motor has failed. You can check that by actuating the valve manually - there's a small lever on it which you can use to open the valve. What kind of boiler do you have? Govan1x 07:25 25 Sep 2018 4 days and no reply. I presume that they must have invested in a shower as well This thread is now locked and can not be replied to.