New build, turns on but no display

  alexisquinn7 19:56 05 May 2017
Locked

My parts Case:Thermaltake Core V1 Snow Mini-ITX Cube Case Motherboard: GIGABYTE Intel LGA1151 Z170N-Wi-Fi ITX CPU: Intel i5-7600K Cooler: Noctua NH-U12S Ram: HyperX Fury 2 x8GB (16GB) DDR4 @ 2666MHz (HX426C15FBK2/16) GPU:Zotac NVIDIA GeForce GTX 1060 6 GB Mini GDDR5 HDD:WD Blue 2TB Desktop Hard Disk Drive - 5400 RPM SATA 6 Gb/s 64MB Cache 3.5 Inch SSD: DREVO X1 Series 60GB SSD 2.5-inch Solid State Drive SATA3 PSU: Corsair CP-9020046-UK Builder Series CX430 ATX/EPS 80 PLUS Bronze Power Supply Unit, 430W Monitor: Acer 24" S241HLCbid 75Hz LED Monitor

I have plugged everything in according to the manuals, and have turned it on and it's running but there's no display on my monitor, it says "no signal" no matter which cable I use (I've tried the cdmi and the dvi cables). There aren't any beeps from my motherboard. Please help. I'm sure I have to upgrade the bios and download the drivers for everything but I can't do that without the display.

  Fruit Bat /\0/\ 22:59 05 May 2017

Have you tied using the onboard graphics?

  alexisquinn7 23:36 05 May 2017

I have, still no display.

  Fruit Bat /\0/\ 23:43 05 May 2017

remove the card and use on board graphics to set everything up and load the drivers for your card then shut down insert card and boot up with monitor connected to graphics card.

  alexisquinn7 02:09 06 May 2017

I have tried using the onboard graphics, it doesn't work. still says no signal on my monitor.

  Fruit Bat /\0/\ 13:03 06 May 2017

is that with the graphics card removed?

  wee eddie 13:42 06 May 2017

No POST Beep. Suggest rechecking all the internal connections

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Moto G6 Play Review: First Look

iPad 9.7in (2018) review

Les meilleures coques pour iPhone 8 & iPhone 8 Plus