Hello, I have 3 Computer running in my house of my work Domain. They were all running fine when I set up the wireless. But I shut 2 of them down and now they can’t get and IP address. I have 2 Cisco 1200 AP talking to each other. One is set up as a Workgroup Bridge and the other is set up as an AP. I have 2 Domain Controllers 1 Primary and the other Secondary. They are both running 2003 Server Standard edition. and they are my DHCP Servers. But my computers aren’t picking anything up for Auto IP's maybe you can help me if so that would be great thanks
In server 2003, have you configured the dhcp and put in an IP range? also have you put in the IP addresses of routers etc? Its also a good idea to put in the DNS otherwise the servers will scan everywhere they can see to try and resolve them. This will really slow things down.
I have already set that stuff up when we had installed the Servers. being that i have 120 other computer that have to run off of it. i dont want to have Static Ip all over. so i have a router set up and i also have the DNS set up. i have done a scan though. i am kind of iffy on that. but other then that thats not the Problem there. I have 2 Cisco Wireless Units they are Aironet 1200's they work great being that we have our house and work are 4 miles apart and we are still talking back and forth. so i am think that the problem that we have is with the 2 Cisco units. but i am not sure. maybe that might help a little more? thanks