GOBEEN 01:02 24 Aug 2003

Hi PPL.I have a mobo.with two sets of X 2 SDRAM.and one x 2 ddr.I'm running SDRAM, but I want to run it in ddr.when I install 256 won't bootup,it is an "ELITE K7S5A."I have gone into "BIOS"and clicked what I think is right,but,when I boot again as one has to,it won't fire,can anybody help please,thanks, GOBEEN

  Djohn 01:50 24 Aug 2003

Have you removed the SDRAM? I think the board gives you the choice of using either, but not both at the same time. j.

  suzie005 02:06 24 Aug 2003

i had a look at crucial ( knowing that u can't mix the two) saw that Elite isn't down as a compatible motherboard for DDR

click here

  hugh-265156 02:13 24 Aug 2003

go to click here and check the ammount and type of memory the mobo supports.this board is listed as revision K7S5A rev1.X/K7S5A rev3.X/K7S5A pro and K7S5A2.

  powerless 02:22 24 Aug 2003

click here

1 gig.

  Djohn 02:30 24 Aug 2003

Thanks suzie005, didn't think you could, but wasn't positive. huggyg71 your right 4 different models, gets a bit confusing! Powerless, Yep! had one myself until last year, then changed to the K7S6A model, reason being that the first version of K7S5A had a bit of trouble recognising my XP 1800 CPU. :o(

  suzie005 11:12 24 Aug 2003

excuse me for asking but can sumbody tell me why the motherboard isn't down on crucial's list?

  Djohn 17:27 24 Aug 2003

They are, all four models are shown under the heading. ecs-elite. Regards. j.

  GOBEEN 23:10 25 Aug 2003

HI PPL, I have just opened and read the post,the MOBO.I have does take's a K7S5A.AND IV'E GOT THE BIBLE,oops,but it doesn't tell you why it wont boot with DDR.installed,I do know the two
cant be run together,if someone can help on this I'd be grateful,i'll try any idea,thank's GOBEEN.

  hugh-265156 08:03 26 Aug 2003

on this page there are some bios that claim to fix "DDR hang during POST" click here

just had a look at click here though and it says you have"2 DDR DIMM sockets and 2 DIMM sockets support (can not be used simultaneously)
Two 184-pin DDR SDRAM (DDR200, DDR266) or
Two 168-pin 3.3V SDRAM (PC100, PC133)
Maximum: 1.0GB (DDR or SDRAM)"

is the memory in the correct slots?

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

iMac Pro review

Illustrator Charles Williams on how to create magazines and book covers

iMac Pro review

Les meilleures prises CPL (2018)