How do I add a second SATA hard drive as a slave?

  MikeSA 19:36 17 Apr 2013

Currently my computer has a 500GB SATA Hard Drive. How do I go about adding another 500 GB SATA Hard Drive as slave. On machines with IDE hard drive, one merely has to connect the slave to the same cable but SATA hard drive cables do not have a connector to connect a second drive. What then is the solution?

  lotvic 21:41 17 Apr 2013

On your motherboard you will have several SATA ports to connect your sata cable to. If you have - say 4, they will be designated Port 1, 2, 3, 4 Picture ClickHere Each sata drive will have it's own separate cable from drive to motherboard. The ports will be marked (very tiny writing) on the motherboard. Your present sata drive that you boot from will be plugged into port 1, which in Windows Computer Management, Disk Management will be shown as 'Disk 0' (don't ask why it's not 1) plug your slave sata into port 2 on motherboard and it will show in Disk Management as Disk 1 (ours is not to reason why...)

The Bios looks to find the first Sata drive that has a bootable op sys on it and boots into that.

For example on mine tonight I have got my W7 harddrive plugged into motherboard sata port 2 and my XP harddrive plugged into motherboard sata port 1. My pc boots up into XP.

When I swap cables round pc boots up into W7.

(I have mine set this way as don't want a dual boot setup, I wanted to keep them entirely separate but be able to access files from both harddrives no matter which I've booted from)

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Samsung Galaxy A8 review: Hands-on

Majority of illustrators don’t earn enough to live from, new survey shows

iPhone X problems

Word gratuit : comment télécharger le logiciel de Microsoft ?