DVD RW upgrade nightmare

  [DELETED] 19:31 24 Nov 2003

I have bought a BTC DVD+/- R/RW CD-R/RW Writer to replace my CD writer. I have a DVD rom as a master drive and the CD writer was the slave. I removed the CD writer and made sure the settings on the new drive were the same, when I boot up and the PC conducts its memory tests it says SECONDARY IDE CHANNEL No 80 CONDUCTOR CABLE INSTALLED which I havent seen before.The drive will open and close but will not read or write to any media, also the pc will not shut down it just keeps re-starting when I try to shut it off. And when the drive is trying to read it causes whatever program im using (My Computer, Nero etc) to freeze. I had no problems before. Im using XP Pro, KT400 GA-7VA m/board, AMD XP2600, 1024gb ram, 120gb h/d. HELP PLEASE before im forced to use the sledge hammer for a bit of fine tweaking

  [DELETED] 19:37 24 Nov 2003

Change the drive to master, uninstall your old version of nero and install the version that came with the drive.

  [DELETED] 17:19 25 Nov 2003

Thanks, I will try it.

  [DELETED] 20:12 26 Nov 2003

No luck, Windows refused to start. An error message appeared and the pc just kept re-starting. Im starting to think the drive might be faulty as i've replaced the CD-RW and everything is fine. Would my DVD ROM be upseting the DVD RW or wouldnt it make any diference ?

  She 22:13 26 Nov 2003

I have a Dell Dimension 8250 with DVD drive and I also want to upgrade it to a DVD writer. I am confused by the terms DVD-(minus) and DVD+ (plus)
which so many of the joint R and RW drives have, as in Geraint's first message. Can anyone explain the difference please?

  [DELETED] 22:23 26 Nov 2003

hello, i have installed a dvd rw and a dvd rom together on the secondary ide controller. the dvd rom as a slave and the dvd rw as the master. Gerainst double check your dvd rwis actualyet on slave, as i didnt at first, they were both set on master and my pc wouldnt recognise any of them. The jumpers are CA on the left or C something which isnt important. The middle one is the slave and the right one is master. Just an idea. also check the cable is in properly and that the cable isnt the wrong way round.

  [DELETED] 21:05 28 Nov 2003

Thanks MR_NICE_GUY I double checked everything and it seems ok. Just to check i've re-installed the original CD-RW but now the PC only displays it as a CD-ROM. I've since re-installed XP and now everything seems fine (for the moment)I think I will take the DVD-rw to my local repair shop in the morning and see if he can make any sense of it

  Rogerfredo 10:53 29 Nov 2003

Buy a combined DVD-R and DVD+R drive.
You then are safe whichever you need in the future.
At present, DVD-R is compatible with most domestic DVD players, so if you want to play your DVDs on TV, this may be the media to use.
DVD-R media is also cheaper.
You can get a writer for about £80 (I just purchased one from Dabs).

  Jakey boy 11:30 29 Nov 2003

80 conductor cable requires that jumpers on all devices need only be set to cable select (CS). Try changing to CS.

  [DELETED] 15:39 30 Nov 2003

I exchanged the DVD-RW for a new one and it installed fine, so it looks like the drive was faulty. Thanks for everyones help it was most usefull.

  [DELETED] 22:00 03 Dec 2003

every time i try to copy any originl dvds copyright will not let me copy on the other hand copyed dvds are know problem help

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Microsoft Surface Book 2 15in review

Illustrator Amy Grimes on how setting up her own eco-brand led to success with clients too

MacBook Pro keyboard issues and other problems

Test : l’enceinte connectée HomePod d’Apple