w.oody 19:30 29 Aug 2003

I have got a microstar 6378 mother board and was running a 1.1 ghz duron processor ,and a mate gave me a 1.8ghz athalon processor. When i fitted it in and run the computer the screen showed that the CPU was only running at 1.250ghz . All I did was slot in the CPU and new heat sink is there something else I should have done?

  The Sack 19:41 29 Aug 2003

because you need to set the FSB to 133MHz, the duron runs on a 100MHz front side bus so the Athlon is running on a 100MHz FSB

  The Sack 19:41 29 Aug 2003

Its in the BIOS BTW

  w.oody 21:12 29 Aug 2003

looked in mother board hand book. looks like i have to change jumpers to get the change does that sound right to you ?

  w.oody 21:14 29 Aug 2003

trying this on saturday ,will let you know how i got on

  w.oody 15:12 30 Aug 2003

thankyou very much it now seems to be working a treat ,a lot faster now

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

iMac Pro review

Illustrator Charles Williams on how to create magazines and book covers

iMac Pro review

Les meilleures prises CPL (2018)