connector for led's

  mantis1 16:30 30 Jun 2007

ive just bought a new case to build a new as quite a few led cables running through it and they have a connector on the end like you use to plug your hard drive in with {not the sata one}the ribbon cable. there is a total of three and i'm wanting to know how i connect them to power them up. is there a card which you can buy to plug them into any help please

  Stuartli 16:37 30 Jun 2007

Are the cables coming from the front end of the case?

If so they are most likely the front case power switch, Reset and HDD indicators.

These are affixed to the appropriate points on the motherboard which will be listed in the mobo manual.

  mantis1 18:47 30 Jun 2007

no they are for the led's light on the case. ihave connected my old mb up and using the pc now to type this.for example i have 3 connectors numbered led 01 02 03 with 4 wires going into each of them on the other side they come out in a ribbon cable all together and has a 34 pin connector and there are 3 of them that need plugging into something.thanks for having a go

  mantis1 19:01 30 Jun 2007

here is a link to a picture of the connectors hope it works.<a href="click here" target=_blank><img src="click here" border="0"></a>

  mantis1 10:54 01 Jul 2007

does anyone know if i could disconnect the leads and put another connection lead on to make them work if so what type of connection do i need

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Samsung Galaxy S9 review

Wacom Cintiq Pro 24 and 32 review – hands-on

When is the next Apple event?

Gmail : comment annuler l’envoi d’un e-mail ?