Cable to front USB

  agarm11 23:46 02 Feb 2003

I'm trying to find a cable to connect from the USB socket on a ECS K7S6A mobo, to the front USB of a JNC case. Any ideas where to find one? I've scoured numerous websites but found none.

  DieSse 23:49 02 Feb 2003

Are they not attached to the USB front sockets already - I've only ever seen ones that are.

  woodchip 23:52 02 Feb 2003

I got mine from the place I got the case, when you have sorted it jog my E-Mail for how to connect as you have to put the wires on the correct pins or you will caput it. I have the same board with a 1600xp to fit the cable you have to pull the front of the case it fit's in between the plastic front and the steel case

  agarm11 23:52 02 Feb 2003

Sorry I'm just doing a worst case scenario, (no pun intended),case hasn't arrived yet, hopefully you're right.

  woodchip 23:55 02 Feb 2003

Mine did not have usb socket, bought separate £2

  flecc 23:55 02 Feb 2003

Maplins have a couple of types. On one the leads are a bit short though, so choose carefully.

click here or 0870 264 6000 or their local shops.

  woodchip 23:55 02 Feb 2003

Mine did not have usb socket, bought separate £2

  pj123 11:12 03 Feb 2003

When the case arrives it will have a diagram in it with all the fitting screws on how to fit the cables.

If it comes without the diagram, I have a setup I can email to you.


  pj123 11:50 03 Feb 2003

Sorry, should also have said that the new case should also come with the front USB cables already fitted.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

HP Envy x2 review: Hands-on

Iconic New York graphic designer Milton Glaser on his uplifting new subway posters

New iMac Pro release date, UK price & specs rumours

Comment suivre le parcours du père Noël ?