Have a Lexmark 1400 wireless printer connected to router and a laptop and desktop also connected wirelessly.
I'm sure that I have done something wrong as the printer was set up initially using the laptop and prints OK wirelessly.
From the desktop when I added a printer not connected I could only see the printer via MSHOME/laptop and while it prints if the laptop is off it doesn't if the laptop is off which defeats the whole object!
Printer sharing is on so I'm sure that I have done something daft so hope you can help?
Thanks Woolwell, I think you are right. I know how to find the printer's IP address on the router page. I have loaded the drivers on the pc so can you guide me how to:- It should have its own IP address. You can find it by looking in the router. This needs to be set to permanent otherwise you will have future problems.
You need to install the drivers on the desktop and then set it to look for the IP address.
I've just had a look at the manual for the 1400 series and it isn't that clear. I can see your problem.
It appears that you need to put the CD into your desktop and then follow the instructions remembering that this will be a network printer and not a local printer. You'll be looking for a printer on its own through MSHome it should have its won IP address. You should be able to find this out through your router's configuration pages.