what psu needed for celeron d 2.53ghz

  rsturbo 22:01 12 Jul 2007
Locked

have 2 cd drives and a floppy drive and elitegroup p4m800pro (sound lan video onboard)512mb ddr

thanks for any help

  skidzy 22:13 12 Jul 2007

Assuming an ATX case,this will do the job just fine click here
Some will argue a heavy branded psu is best,yes it is.
Ive fitted a few of these now with no problems to date.

  rsturbo 22:29 12 Jul 2007

300w supply kicking around will this do?

  skidzy 22:37 12 Jul 2007

Well yes...but if i was installing one,nothing less than 500watt is my moto.
As long as its an ATX 300w,you will soon know if the screws line up.

Though i should add,if you have a 300w branded psu it should be ok...but again i would go for something around 500w.

  hssutton 23:02 12 Jul 2007

This will help you work out what size you want

Component Wattage Required


Motherboard 15-30


Low-End CPU 20-50


Mid To High-End CPU 40-100


RAM 7 per 128MB


PCI Add-In Card 5


Low To Mid-Range Graphics 20-60


High-End Graphics 60-100


IDE Hard Drive 10-30


Optical Drives 10-25

Info borrowed from click here

  citadel 23:45 12 Jul 2007

look for one with the 80% + logo to save on your electricity bill.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

The Evil Within 2 review-in-progress

InVision Studio takes on Adobe XD and Sketch

Camera tips to take better iPhone photos

Comment transformer un iPhone en borne Wi-Fi ?