USB2 not?

  jagsman 16:36 02 Aug 2005

I have recently updated my mobo to an ABIT NF7-S version 2.0. After rebuilding and installing everything i ran SiSoft Sandra 2005 to see if everything was up to speed. I noticed that only 1 of the 3 USB controllers was showing as USB2.On the mobo itself there are 2 USB headers on the board as well as 1 on the back panel. The USB sockets on the back panel are the only ones showing as USB2. From the 2 headers on the board i have taken 1 to USB sockets on the front panel of my case, and the other on to a USB expansion card at the rear of the case. I know that the case front USB sockets are probably not USB2 but the expansion card is definately USB2. Does anyone know how to fix this? I have installed all the latest BIOS for the Mobo, and my PC spec is as below;

XP Pro SP2
2500XP Athlon
Seagate 120gb HDD

Thanx in advance for any help

  Eric10 17:09 02 Aug 2005

It is perfectly normal to only have one entry for 'USB2 Enhanced Host Controller'. Belarc Advisor, Everest Home Edition, and Device Manager show the same. Relax, there isn't anything wrong with your system.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Galaxy Note 8 vs iPhone X

Awful clip art from 1994 is being tweeted every hour by a bot

iPhone X vs Samsung Galaxy Note 8

Les meilleurs navigateurs internet 2017