Trouble with DVD rewriter

  paul_allard 11:29 17 Mar 2007
Locked

I bought a Liteon DVD external rewriter off Ebay (LiteOn SOHW-1213SX). Attempts to burn DVDs have failed so far. I believe that the rewriter is working (power on, whirring etc..) but the process is failing. I have copied the error message but it's very long and will certainly not fit in here. I'm running XP SP2 and using Nero and DVD Shrink. Perhaps I'm going around it wrong so any advice gratefully received

The following helps : Data in Burst Cutting Area (BCA) does not exist (part of error message).

  Pamy 11:35 17 Mar 2007

Hi PaulAllard, Have you burnt disks with these prog's. before on another DVD burner? Just wondetred if this was something new to you.

  paul_allard 12:00 17 Mar 2007

Never burnt a DVD before so it's all totally new to me

  Fruit Bat /\0/\ 12:06 17 Mar 2007

Copy the error message to notepad split in half and post here.

with external USB burners check you are using USB2 and you are writing at a slow speed x2.

My gues is transfer speed and buffer under / over runs.

  paul_allard 12:10 17 Mar 2007

first part

1A20-0105-0030-1963-1314-1699

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=0 bytes, created 23/03/2006 10:20:19
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\NeroApplication: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS09 - HA 2 TA 0 - 6.6.0.3
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8480B atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8161 D: CDRom0
HL-DT-ST CD-RW GCE-8480B E: CDRom1
LITE-ON DVDRW SOHW-1213S F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522736kB)
Free physical memory: 145MB (148984kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.3.2007
NeroAPI
08:16:26 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

08:16:26 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

08:16:26 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

08:16:29 #4 Text 0 File Reader.cpp, Line 127
Reader running

08:16:29 #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1213S running

08:16:29 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

  paul_allard 12:11 17 Mar 2007

second part :

08:16:29 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

08:16:29 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

08:16:29 #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media

08:16:31 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285977 (507:59.52, 4464MB)

08:16:31 #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO

08:16:31 #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON DVDRW SOHW-1213S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

08:16:31 #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

08:16:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SOHW-1213S]
--------------------------------------------------------------

08:16:31 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [LITE-ON DVDRW SOHW-1213S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 387022848, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00

08:16:34 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

08:16:34 #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

08:16:34 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

  paul_allard 12:11 17 Mar 2007

third part

08:16:34 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)

08:16:35 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

08:16:35 #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

08:16:35 #22 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

08:16:35 #23 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes

08:16:35 #24 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

08:17:02 #25 Text 0 File Cdrdrv.cpp, Line 1282
08:17:02.578 - LITE-ON DVDRW SOHW-1213S\H2 T0 : Queue again later

08:17:10 #26 SCSI -500 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08CC4000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

08:17:10 #27 Text 0 File Cdrdrv.cpp, Line 1282
08:17:10.671 - LITE-ON DVDRW SOHW-1213S\H2 T0 : Queue again later

08:17:17 #28 SCSI -1135 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00C00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)

  paul_allard 12:12 17 Mar 2007

last part

Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

08:17:17 #29 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
LITE-ON DVDRW SOHW-1213S\H2 T0

08:17:17 #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

08:17:18 #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

08:17:18 #32 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 31

08:17:23 #33 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)

08:17:23 #34 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

08:17:23 #35 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=?.?.?.?, size=0 bytes, created 23/03/2006 10:20:19

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  paul_allard 12:13 17 Mar 2007

How would I know if it's USB2 ?

  eedcam 13:49 17 Mar 2007

Paul forget nero for the moment download Imgburn which is designed to work with shrink (Free) click here and try that to burn with

  sheila.weston 16:12 17 Mar 2007

Just a thought - I find that Nero Express works a lot better than the other screens of Nero.
Sheila

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

OnePlus 5 review

Alice Saey's mesmerising animation for Dutch singer Mark Lotterman

iPad Pro 10.5in (2017) review

Comment booster votre iPhone ?