The Evil Within 2 review-in-progress
I have acquired an old Toshiba Laptop - model 540CDT. It has no OS so I need to enter BIOS to get it to boot from CD. But I've tried a few options to no avail. Anyone know how?
Thanks, I found that site earlier and for the Tecra it states - 'F1 o#F1EFA5r ESC'. I tried F1 and Esc, any idea what the gobbledegook in between means???
Have a read through this, click here
That link didnt work for me, I got an 'Apache Tomcat/5.0.29' error message.
I tried holding Esc down then switching on; Switching on then immediately holding down Esc; Switching on and slowly tapping Esc; Switching on and quickly tapping Esc.
But no luck so far.
Off Toshiba WebSite,
For Toshiba notebook PCs manufactured since the introduction of Windows XP, one or more of the following methods will be effective:
Toshiba Hardware utility method: Run the Toshiba Hardware utility from the Toshiba Console. It may also accessible (as 'HWSetup') from the Windows Control Panel. Changes to some of the settings will require re-starting the computer. This method is the only way to access the BIOS settings on some notebook PCs (Satellite 5000 series, for example). (For these machines, pressing and holding the F12 key immediately after powering-on the notebook will allow you to alter the notebook's boot priority.)
If the Toshiba Hardware utility is not present, try the F2 key method and the Esc key method (see below). The Toshiba Hardware utility may be downloaded from the Toshiba support website at click here
If the computer is fully off, and/or to avoid having to re-start it (and Windows), use one or the other of the following two methods. The PC will have to be truly off (not suspended, or in standby mode, or in hibernation mode). If an external keyboard is attached to the notebook (either directly or via a docking station or a port-replicator), disconnect it until you have completed this procedure.
F2 key method: Turn the computer on. If you see an invitation to press the F2 key to enter Setup, do so. The Setup screen will appear.
Esc key method: Turn the computer on. If you do not see a prompt to press the F2 key, then immediately press and hold the Esc key for three seconds, and then release it. When prompted to, press the F1 key. The Setup screen will appear.
For Toshiba notebook PCs manufactured before the introduction of Windows XP, one or more of the following methods are appropriate:
HWSetup method: Run the HWSetup utility from the Windows Control Panel. This utility provides a relatively user-friendly way to change the BIOS settings. Changes to some of the settings will require re-starting the PC (and Windows). HWSetup was pre-installed on all but early Toshiba notebook models. If it doesn't appear as a Control Panel applet on your computer, you may be able to download it from the Toshiba Support website as part of the Toshiba Utilities package for your model.
Esc key method: If an external keyboard is attached to the notebook, either directly or via a docking station or a port-replicator, disconnect it. Turn the computer on. Immediately press and hold the Esc key for three seconds, and then release it. When prompted to, press the F1 key. The Setup screen will appear. The PC will have to be truly off (not suspended, or in standby mode, or in hibernation mode) for this method to work.
TSETUP method: Run the TSETUP utility, under MS-DOS. TSETUP runs correctly only when executed from a 'native' MS-DOS prompt, and with the processor running in real mode -- so not from a Windows 'DOS box', and without any memory manager software running (EMM386.EXE, HIMEM.SYS, or QEMM386.EXE, for example). TSetup was pre-installed on most early Toshiba notebook models (except for the very earliest models). It is available from the Toshiba Support website.
Hi all and Happy New Year
Well I did some further searching and it seems it isnt possible to enter the BIOS on this model. I found a forum linked to the Toshiba site and the suggestion I liked best was to remove the HDD and format it and load OS in my desktop (I have experience in doing this) however I would need an adaptor kit as the cables differ. Unfortunately I cant find the forum again (I've been through History) so does anyone know what this is and where I could get one?
laptop hard drive to IDE connetor
Great! does the power too, which was my main concern. Thanks.
This thread is now locked and can not be replied to.