Telnet router (or rather telnot)!

  hatrickj 20:16 22 May 2010
Locked

My system is Windows7 Home Premium and my router a Netgear 834G v3 with u.t.d firmware working with an ADSL2+ connection that is permanently on

I have enabled telnet in the system's control panel, but when I start, run, and enter cmd telnet 192.168.0.1. the router's address, the screen appears but momentarily then vanishes. No data appears.

I hope someone can help me with this, please. :)

  johnnyrocker 20:20 22 May 2010

it would avoid confusion for others if you stick to one posting on the same or similar problem



johnny

  hatrickj 20:27 22 May 2010

@johnny rocker.
I do not recall raising more than this thread on my telnet problem, It only happened this evening

  hatrickj 20:28 22 May 2010

@johnny rocker.
I do not recall raising more than this thread on my telnet problem, It only happened this evening

  hatrickj 21:23 27 May 2010

Well I give a big cheer to the gentleman, who has ruined the chance of a perfectly reasonable and genuine question unjustifiably.

  Atlantic Man 13:11 28 May 2010

Must be the router itself, try to reset it and also disconnect power cable for about 20 secs,

Could have internal damage, or firmware corruption,
I would bet you have Telnet Client and Server installed and that you have checked that the Telnet services are running ??

Try d/loading another telnet based emulater and try it with that.

Cheers
Atlantic Man

  Atlantic Man 13:12 28 May 2010

make sure that windows 7 has not blocked port 23 in the firewall.
cause the security of 7 is hectic...

cheers

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Galaxy Note 8 vs iPhone X

Aardman's new YouTube channel to share the work of independent animators

iPhone X vs Samsung Galaxy Note 8

Les meilleurs navigateurs internet 2017