sluggish system

  brillday 22:03 30 Jan 2003

I recently installed a maxtor 40 hd as slave to my original small drive everything worked fine but now system becomes extremely sluggish and insists upon scanning drive at start up- then scans 15 per cent of drive then freezes, only way to access windows is to exit before scan starts but then system becomes extremely sluggish- a long time after mouse click for anything to happen. Have disconnected new drive and now works fine, any solutions anybody?

  Simon_P 22:20 30 Jan 2003

It maybe that your older drive conflicts with the I'm sure much faster new maxtor. Consider using maxtor drive as primary master and old as slave (if you really need the other drive.) also some maxtor drives work better when formated with Maxtors own formating tool
Maxtor have a very good FAQ, fourm and after sales support, click here

  brillday 22:30 30 Jan 2003

I've used their formatting software and initially visited their site when I got the drive.The point you made about using the newer, bigger drive is a good one and I think that's the thing to try next,thanks for the advice.

  Simon_P 22:43 30 Jan 2003

I have 2 drives Maxtor "dimondmax" ATA133 as primary and W Digital as slave both 7200 rpm but slave ATA 100, performance is v good, had WD drive as primary but had simular problem as you and swoped them. Good luck, glad I could help.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

OnePlus 5T review: Hands-on

Illustrator Andrés Lozano on his improv line work, brazen use of colours & hand sketching

iPhone X review

Comment envoyer gratuitement des gros fichiers ?