Shuttle wont start

  neilstratton 21:29 06 Sep 2006
Locked

I have a Shuttle SB81P that wont start.I know the psu is ok as I have changed it with one I know works.
When I press the power button the fans all start but nothing else.There is no led on the mobo.No led on front panel.
It was moved from one place to another yesterday and it obviously had a knock as the hard drive was unseated.
Any ideas please?

  wee eddie 22:07 06 Sep 2006

Open it up > Re-seat everything > Check all connections > Restart.

  neilstratton 22:12 06 Sep 2006

Thanks eddie done that.Nothing.No beep.No led on mobo...

  woodchip 22:15 06 Sep 2006

Retry the PSU that you took out

  neilstratton 22:22 06 Sep 2006

Also done that woodchip.How can I tell if my mobob is dead?Would the fsns work?I have four identical machines so am able to swap bits around.The psu I swapped was identical.

  woodchip 22:25 06 Sep 2006

Only way is to put a new one in. Try removing power from All Drives to see if you can get it o post to BIOS. Just pull the plugs off remove all card other than Graphics

  woodchip 22:26 06 Sep 2006

Only way is to put a new one in. Try removing power from All Drives to see if you can get it o post to BIOS. Just pull the plugs off remove all card other than Graphics

  neilstratton 22:31 06 Sep 2006

Thanks-just done that.What does post to bios mean?

  woodchip 23:07 06 Sep 2006

You may get a Beep, also if you press like Del it should go to BIOS does the screen light up as above

  neilstratton 23:35 06 Sep 2006

No beep.No load of bios.No screen.....

  xania 09:12 07 Sep 2006

Go back a stage. You have said that the fans are not moving. This implies no power is getting to the mobo. Some mobos require more than one connection and looking at the FP81, it looks as if this is the case here.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Fujitsu Lifebook P727 laptop review

Microsoft Paint set to die after 32 years

Mac power user tips and hidden tricks

Comment désactiver la saisie intuitive et paramétrer votre clavier ?