My pentium 3 computer has started crashing and the cpu temperature is 60-62c. Any ideas? The fan is working!
Have you added any new hardware?
No only the speedfan software download
Has the problem been hapening since then... if so then the fan speed is set to low. click here
Thanks andy for replying. The fan speed is set at 100% which is 5200rpm.
Try booting into the bios and looking in System Health (or similar) and see what the temp of the procesor is there.
I did try on several ocasions last night to have a look at the bios. When the first screen comes up it says press esc for cmos or f2 for post. Which one do i push for cmos or post?
I am open to correction but 60/62 isn't excessively hot. I would suspect that your problem lies elsewhere. Try removing Speedfan, how does the system crash ? i.e. does it give an error msg. or freeze.
could be power unit over heating. look at the back if the fan is clogged with dust switch off and use vac.
Thanks BRYNITI will give that a go!
This thread is now locked and can not be replied to.
Best phone camera 2017
Stunning new film posters by Hattie Stewart, Joe Cruz & more
iPad Pro 10.5in (2017) review
28 astuces pour profiter au mieux de votre iPhone
© Copyright 2017 IDG UK. All Rights Reserved.