1 Failure light
2 Internet Service light
3 Local LAN Traffic light
4 Telephone light
5 Wireless light
functions of the lights:
1 This light flashes during the startup diagnostics of your Livebox. After this test :
the light is ON if a failure is detected. You should reboot your Livebox by removing the power cable and then replacing it whilst holding down Button 1 (for approx 10 secs) on the back of the Livebox. If this does not resolve the problem, then you will need to call Broadband Customer Support
the light is OFF if your Livebox is functioning correctly
2 This light :
flashes rapidly when your Broadband is not synchronized. This could be because your telephone line has not been enable for Orange Broadband yet. This can take up to 10 days from the point of registration. Alternatively, your filters may not be set up correctly. Alternatively, you may need to check the set up of your broadband filters.
flashes slowly when your Broadband is synchronized but you have not correctly installed your Livebox, eg your username and password haven't been entered correctly
is ON when you have successfully logged into your broadband account
3 When this light is flashing it indicates that data traffic is being passed from your computer to the Livebox, such as when you're surfing the web.
4 This light indicates the state of your Wireless & Talk telephone service.
the light is ON if your IP telephone line is available
the light Flashes if the IP line is in use (eg making or receiving a call)
the light is OFF if the service is not activated
5 This light :
is ON if a Wireless link is available
Flashes if your Livebox is in Pairing/Association mode
is OFF if a Wireless link is not active