msi mainboard non post problem

  THOMAS 20:17 02 Dec 2003
Locked

Hi
Have just built a new pc with km4m ms-6734 mainboard which refuses to post xp2600 cpu have tried changing cpu and ram but no joy,any ideas. There is a four pin jumper (jpw1) which is 12v power supply to cpu but it does not make it clear in the users guide as to whether it should be connected or not the speaker does make slight noise but not a beep,have also tried new 550w psu.Any ideas please

  dfghjkl 20:49 02 Dec 2003

someone recently had a problem after a build,they had connected up a case fan to the system fan pins on mobo,this caused it not to post as it was a fixed speed fan,not a variable speed.just a thought.you could always take off all wires and start again ,connecting only bare minimum and keep trying to start it.good luck

  Rayuk 20:52 02 Dec 2003

Without looking at manual does it have integrated graphics,I have an MSI nforce 2 board integrated graphics with the 4 pin power connecter which I have plugged in.

  DieSse 22:04 02 Dec 2003

Yes, you should definately connect the 4-pin auxiliary power connector.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Galaxy Note 8 vs iPhone X

Awful clip art from 1994 is being tweeted every hour by a bot

iPhone X vs Samsung Galaxy Note 8

Les meilleurs navigateurs internet 2017