Hello I’ve been over-clocking for the first time and have seen my Memory timings change from: CAS Latency (tCL): 2 clocks @133 MHz, 2.5 clocks @166 MHz RAS to CAS (tRCD): 3 clocks @133 MHz, 3 clocks @166 MHz RAS Precharge (tRP): 3 clocks @133 MHz, 3 clocks @166 MHz Cycle Time (tRAS): 6 clocks @133 MHz, 7 clocks @166 MHzOver-clocking Settings(ASUS A7N8X-X - NFORCE 2AMD 2500 Baton @ 1980MHz 180MHz FSB - Temp 34 Idol - 43 Full Load2 X 512MB PC2700 Crucial - Micron Ram Single Channel Mode)To:Frequency: 180 MHz FSB/DRAM Multiplier: 1/1x Channels: Single ECC Diagnostic: No CAS Latency (tCL): 3 clocks @ 180MHzRAS to CAS (tRCD): 4 clocks @ 180MHzRAS Precharge (tRP): 4 clocks @ 180MhzCycle Time (tRAS): 8 clocks @ 180MhzAre these new timings above, Ok or should I alter them?Thanks in advance.
i wouldnt go voerclocking memory, can be dangerous, but if you insist get some heatsinks for them, ebuyer do some good ones
The system is stable and running happily @ 2000MHz / 181MHz FSB.GPU PNY 6800 GT 256MB @ 400/1.1GHzIt just been through Sandra burn-in and 5 hours of Farcry @ Ultra High settings 2XAA 2XAF, with not one pause or crash.I'm just trying to find out wether CAS Latency 2 changing to CAS Latency 3 is an improvement or loss in memory performance timings.
losslower CAs is better
This thread is now locked and can not be replied to.
OnePlus 5 review
Alice Saey's mesmerising animation for Dutch singer Mark Lotterman
iPad Pro 10.5in (2017) review
Comment booster votre iPhone ?
© Copyright 2017 IDG UK. All Rights Reserved.