Installing a Belkin Wireless Modem

  spuds 11:58 04 Apr 2008

Recently purchased a Belkin F5D7632-4 Modem with Wireless-G Router, and reading the installation instruction manual as led to further confusions and head scratching.

The instruction manual shows that you have to transfer information from a previously installed modem (impossible via a USB connection) to the Belkin modem. Belkin states that this is not necessary,and should be ignored, a new independent connection is possible. But how do you go about this, because having installed the Belkin modem, then trying to get a connection via the Belkin "" in the url address, nothing happens.

A simple plain and easily explained solution will be very welcome and gladly received, by a very confused user and neighbour.

Operating System: Microsoft XP (Home and Pro). Tiscali as the Internet Service Provider.

Would mention that my neighbour had similar problems, and consulting Belkin technical support, he became more confused as to how he could install their similar Belkin modem. In the end he resulted in calling in outside help.

  DippyGirl 12:26 04 Apr 2008

Hi there
Plug in router and connect to a phone socket
Connect a pc to the router via the ethernet port
Open a browser in the location bar that should get you the login screen to the router
passwrod is blank <you should change this>
You then follow the steps outlined in sections 4/5 of the userguide click here
Get back if you hit a problem

  spuds 17:15 04 Apr 2008

Thats the point, I cannot get any further than

I have been in touch with Belkin, and they have confirmed certain things, including that there is a way around this. I was hoping that someone had experienced the same problem, and knew of a easy solution.

  ambra4 18:34 04 Apr 2008

First set up the LAN card and the network on the computer

Web Browser Settings

Internet Explorer 4.0 or Higher

Start IE web browser. Select-Tools-Internet Options-Connection Tab

In the “Connection” screen, there are three selections:

“Never dial a connection”,

“Dial whenever a network connection is not present”

“Always dial my default connection”.

If you can make a selection, select “Never dial a connection”.

If you cannot make a selection, select “LAN Settings”

Untick marks next to any of the displayed Options:

“Automatically detect settings”,

“Use automatic configuration script”

“Use a proxy server”.

Click “OK”. Then click “OK” again in the “Internet Options” page.

Network Adapter Setup on all Computers

Also called a LAN card (Local Area Network)

or NIC card (Network Interface Connection)

Click-Start-Settings-Network Connection

Double-click on the “Network Connection”

Left-click on the “Local Area Connection” associated with your network adapter

Select “Properties” from the drop-down menu.

In the “Local Area Connection Properties” window all boxes should be ticked

At bottom of display tick the box “Show Icon in Notification Area When Connected

A display Icon will appear in the task bar when you have finish the setup

Select-Internet Protocol (TCP/IP) Click the “Properties” button

Select “Obtain an IP address automatically

Select “Obtain DNS server address automatically”

Click- Advanced-Click-WINS Tab-Tick-Enable LMHOSTS Lookup if Untick

Do Not Change Any Other Setting

Click “OK”.

Your computer network card is now configured for use with the Modem/Router

  ambra4 18:34 04 Apr 2008

Other Lan Card Setting

Right click on Local Area Connection Display Icon on task bar

Click Status-General-Properties

At the top of display the type of Lan card will be displayed

Click Configure-Click-Advanced Tab

Click- Flow Control-Change to Enabled if Disabled

Click-Power Management Tab

Untick if selected "Allow Computer to turn this device off to save power

Network Connection Setting

Click-Start- Setting-Network Connection-New Connection Wizard

Select-Connect to the Internet-Next

Select-Set Up My Connection Manually-Next

Select-Connect using a broadband connection that is always on


Power up the router and open the browser enter the correct code which you can find in the manual

  spuds 11:50 05 Apr 2008

Thanks for that. I will give it a try over the weekend.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Xiaomi Mi Mix 2 review

What went wrong at the Designs of the Year 2017

iPhone X news: Release date, price, new features & specs

Comment créer, modifier et réinitialiser un compte Apple ?