Host / Serial Bus controllers for deleteion on USB

  Ex plorer 14:04 19 Jan 2011
Locked

Hi my canon 40D wont Connect properly to my Laptop so that I can transfer the photos from the camera.

This is the message I get.
Device driver software was not successfully installed
Device driver software was not properly installed.
Currently, this hardware device is not connected to the computer. (Code 45)


I am following this below The exception is its called Universal HOST Controller that pop up after expanding Universal Serial Bus controllers.
Can they be deleted and reload on restart?

1. Click Start, and then click Run.

Note If you are running Windows Vista, click Start, and then use the Start Search box.
2. Type devmgmt.msc, and then click OK. Device Manager opens.
3. Expand Universal Serial Bus controllers.

4. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
5. Repeat step 4 for each USB controller that is listed under Universal Serial Bus controllers.
6. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
7. Check the USB device to see whether it is working.

  northumbria61 14:09 19 Jan 2011

YES !

  Ex plorer 14:15 19 Jan 2011

northumbria61 Thanks

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

OnePlus 5 review

Best of the Grad Shows 2017: UAL Central Saint Martins

MacBook Pro 15-inch (2017) review

Comment connecter un MacBook à une TV ?