Heatsink and Fan

  Ex plorer 10:16 10 Nov 2006
Locked

Hi any one help out I have just built a PC its running 3.0GHz Pent processor I have just obtained a heatsink and fan for it.
click here


The numbers on the Intel Fan are-

AB0856-003
N 32160 E1
FO8G-12B2S1 06AC1
DC12V0.28A
NTDEC CORP.
Its for a 478 board

  keef66 10:20 10 Nov 2006

sorry, what's your question?

  Mr Mistoffelees 10:21 10 Nov 2006

What is that you wish to know? It is not clear from your thread.

  Ex plorer 10:22 10 Nov 2006

Supports Pent 4 3.06 spent ages looking before trying PCA

  Totally-braindead 10:24 10 Nov 2006

Still not clear what you are asking.

Are you asking if this fan will cool a Pentium processor running at 3 ghz? Is that it?

  Ex plorer 10:29 10 Nov 2006

Yes I have just re read, I have a Pent 4 478 board and the processor is a Pent 3.0 GHz. I wanted to know if the fan and heatsink were up to the job of keeping the processor cool.

  Mr Mistoffelees 10:31 10 Nov 2006

They will do the job, but be noisy. Perhaps buy a Zalman cooler, both quieter and cooler running. I have a Zalman CNPS9500 running on an AMD Athlon 64 4000+, it is quiet and very efficient.

  Totally-braindead 10:33 10 Nov 2006

One of the pictures has the box on it, does it not say on the box what processor was provided?
The only reason I am suggesting this is I'm unsure if theres more than one fan for a Pentium 4 socket 478 processor and therefore am unsure as to how to identify it.

  Ex plorer 10:34 10 Nov 2006

Hi thanks all sorry for the mix up.

  Totally-braindead 10:43 10 Nov 2006

Its ok Ex plorer you must be having an off day as your postings are usually quite clear.

Did having another look at the box help any? Sorry but I'm unsure as to how to identify the fan from the numbers you give, perhaps an email to Intel as they supply it.

  Ex plorer 11:31 10 Nov 2006

As I bought this on eBay it was packed only in a press fit plastic container with no numbers on it but it was the only place I could find a new one.
I have found a reference to this fan that says it is ok for all pent 4s up to 3.06 GHz.
The big difference is that my old heatsink has a copper core whilst this one dose not, so I will keep a look out for a fan that fits my old heat sink.
In the mean time I will run a test with this new setup and keep an eye on the processor temperature.
Advice on what the temperature should be or shouldn’t be would be welcome.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

WPA2 hack: How secure is your Wi-Fi?

HP’s new Surface Pro rival is designed specifically for Adobe-using designers and artists

Best kids apps for iPhone & iPad

Que faire si son iPhone ou iPad est tombé dans de l'eau ?