Graphics problem

  gibraltar1961 16:40 18 Jan 2011
Locked

Hello and help.
I have an Acer Aspire 6530, the graphics are very "juddery" for want of a better description. This happens when i'm viewing for instance Youtube or films stored on my laptop. I have been on the Device Manager and updated/checked as necessary any graphic related drivers. The problem still persists.
This happened, by the way after i did a restoration back to factory defaults using the recovery disc.

  northumbria61 18:44 18 Jan 2011

Update your Flash player

  gibraltar1961 19:12 18 Jan 2011

I've updated the Flashplayer but still have the same problem. Thank you for your help.

  northumbria61 11:21 19 Jan 2011

Have you got the latest Codecs pack? If not download and install from here click here

  gibraltar1961 10:46 20 Jan 2011

Thanks for the advice. I've updated my codec pack, the problem is still there, i think, actually the computer as a whole may be slow or am i clutching at straws. The last time this happened was a few days after i had bought the lap top, i sent it back and i think they did something to the bios ?

  Fruit Bat /\0/\ 14:52 20 Jan 2011

1. Software

a) Clear out all temporary files and folders -- use Crap Cleaner click here

b) Scan for malware spyware and viruses --Free Anti Spyware :-
Superantispyware click here
Malware removal tool click here

Free Antivirus software
MicroSoft Security Essentials click here
Avast4 click here
or
AVG antivirus click here

c) Clean the registry -- Use the tool in Crap Cleaner its very safe and also allows you to back up the registry first.

d) Pagefile (Virtual Memory) -- Right click MY Computer - select properties - Advanced tab - Performance -
advanced tab - Virtual memory click change, you can put the page file on a different drive (if you have one), click
custom size and set Initial size to one and a half times the amount of memory you have fitted i.e. 512MB memory
= set to 768MB, set maximum to double your memory amount i.e. 512MB memory = 1024MB click ok.
If your hard drive is full and there is not enough room for the pagefile this can slow down, freeze or even cause the
PC to crash (restart).

e) Cut down on the programs that load at start up -- Start - Run type msconfig - start up tab- untick everything
except for firewall, antivirus and antispyware

and the services that run in the background. click here


2. Hardware

a) Hard drives /

i) IDE Channels: (Not required if you have SATA drives)
Check the transfer rate, you need to have the transfer mode set to DMA not PIO.
Right click My Computer - Properties - Hardware - Device Manager - Expand (click the + ) IDE ATA/ATAPI controllers right click Primary Channel - Advanced Settings Tab -
If transfer Mode is PIO then follow the instructions at click here to change.

ii) Check for errors and defrag your hard drives -- My Computer - select drive - properties - tool tab - Error checking / Defragmentation.

ii) If you are using Windows XP, Vista or Windows 7 it's a good idea to convert your system drive to the NTFS file system if you have not already. In addition to providing numerous security and data recovery improvements over FAT32 (the file system of choice for Windows 9x/ME and XP Home) it can also speed up your system slightly.

In fact, the only real reason for sticking with the FAT32 file system for any of your data is if you have more than one operating system on your PC and the other OS's can only see FAT32 partitions (as would be the case with Windows 98, for example, which is incapable of reading NTFS data).

To convert your drives to NTFS:
Right click on 'my computer' and select 'manage'
From the computer management window, expand storage and select 'disk management.'
Using the 'file system' column of the upper pane of this window, you can easily check what file system each of your logical drives is using. Make a note of this information.
Now open a command prompt window by going to 'start\run' and typing 'cmd'
To convert a disk to NTFS, type 'convert (drive letter): /fs:ntfs'
So for example, if you were going to convert your C: drive, you would type 'Convert c: /fs:ntfs' at the prompt.

b) Drivers
Obtain the newest drivers for your hardware
This may seem a bit obvious, but keeping your system's drivers up to date can give both your performance and stability a boost. Video card manufacturers release updates especially often, and these can often give "significant boosts" to gaming performance as video card in question is "optimized."

Don't neglect the other components of your system either. Your motherboard manufacturer may have released newer versions of its Input/output drivers for your board, and sound cards and other peripherals can also benefit from newer software.

c) Memory
Add more physical memory, this of course means opening the "box" and fitting a memory module, make sure you buy one that is suitable for your PC. Crucial .com click here will guide you through the process of selecting the correct memory. click here for a guide to fitting memory.

  gibraltar1961 19:41 20 Jan 2011

Thank you very much indeed for your advice. I will get a friend of mine who is a bit more computer literate to follow your recommendations.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Xiaomi Mi Mix 2 review

See mcbess's iconic style animated for Mercedes-Benz

iPhone X news: Release date, price, new features & specs

Black Friday 2017 : date, sites participants & bonnes affaires