Have connected the Front USB wires to mainboard ECS K7S6A. The book suggests that it should be installed as follows:- Pin 1 +5V Pin 2 Ground Pin 3 USB2- Pin 4 Empty Pin 5 USB2+ Pin 6 USB3+ Pin 7 Ground Pin 8 USB3- Pin 9 Ground Pin 10 +5V
The wires in the case are as follows:- Green 2 +D, White 1 ?D, Yellow 2 ?D, Red 1 +5v, Red 2 +5v, Blue 1 +D, Black 1 Ground, Black 2 Ground, All single pin connectors.
Straight away I am 1 Ground wire short??
I have tested the USB port to see if it works by connecting a printer to it. The front USB ports do not work, I know this only because the printer works when connected to the rear USB ports.
As the book does not refer to colours or to the wire descriptions on the wires, I have put them where i think, obviously wrong.