force route table to DHCP client

  soegab 00:25 03 Dec 2007
Locked

hello,
I'm new in this forum, and i have some problem that need to be solved so I ask for your help expert here.

I have a network that will be connected to the outside this way:

[internet]
|
|
[router(main)-using dhcp server]
|---------------|--------------|
|---------------|--------------|
net1router net2router net3router

my question is :
if I am using DHCP-server on my main router, and on net1,2,3 i'm using dhclient to get the address how could i force client that connected to the network 1/2/3 to set their gateway to their respective router. what is the efficient configuration on router for network1/2/3 ?

sorry for my bad english, since it's not my mother language.

thank you

  mgmcc 08:37 05 Dec 2007

If you want the computers attached to the three "sub-routers" to be able to communicate with each other try giving the *MAIN* router a 192.168.x.1 IP address with Subnet Mask 255.255.255.0

Then give the three sub-routers the IP addresses 10.0.0.1, 10.0.1.1 and 10.0.2.1 with Subnet Mask 255.0.0.0

The three sub-routers will get a 192.168.x.x address by DHCP as their WAN IP address and in turn will allocate 10.0.x.x addresses by DHCP to connected computers.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Galaxy Note 8 vs iPhone X

Awful clip art from 1994 is being tweeted every hour by a bot

iPhone X vs Samsung Galaxy Note 8

Les meilleurs navigateurs internet 2017