Floppy Disk

  Tempest1 02:14 30 Mar 2003

Have just changed my motherboard to a jetway 266b and now on the bios screen I get an error message for the floppy disk.
"Floppy Disk error (40)" anybody there to help?
No lights or action from the floppy at all tried connections on another unit no problem.Does this mean replacing the Floppy?

  DieSse 02:23 30 Mar 2003

Check the cable is fitted correctly - connector on the end near the twist in the cable to the floppy - connector at the other end to the motherboard (do not use the middle connector).

It's vital that pin1 on the cable goes to pin1 on the connector at both ends.

It could be a faulty cable.

Check the BIOS is set to the correct type of floppy drive 3.5" 1.44 Mb

It may be a faulty motherboard.

  Giggle n' Bits 02:24 30 Mar 2003

on the Drives pins ?.

Check the Red line is facing away from the Power source or the otherway round. Red line on edge of ribbon cable must be to pin 1 on motherboard.

Have you got the Floppy drive enabled as Boot device and selceted as 1.44MB 3.5" drive.

Change the cables round when machine is off.

  Giggle n' Bits 02:25 30 Mar 2003

God he's quick, even in the early hours.

  Tempest1 11:31 30 Mar 2003

Many thanks guys but having hooked it the m/board to another pc and the floppy booted up I think its going to be a replacement drive.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

OnePlus 5T review

How to draw a mandala

iPhone X review

Les meilleures enceintes Bluetooth à moins de 150 euros