i have a time computer with connectpro memory card reader, when i load and read my sony memory stick and than just unplug, and put back in the camera it says i need to format the stick and i loose everything that was on it. when i click on remove hardware in the system tray, and go through the steps everything seems okay, but this totally removes all the removable drive from my computer until i reboot, does anyone out there know the correct way to overcome this problem, looked for connectpro on the web to try to find instructions, but no good. thanks
no ziggypop, tried that, memory stick reads on g drive, when i removed the stick as directed, it seemed to be okay when i put it back in the camera, but all the removable drives are now removed from my computer and are unusable.
hello all, finally figured out the crack on the connect pro, there are 4 momery card slots, each one is assigned a drive alpha i.e. g,h,etc., they are all connected to the computer via a usb internal port. when you plug in your card, in my case memory stick, you need to find out which drive reads the card and than rename it, when you go to unplug the device, file up to the appropiate drive, right click and than left click on eject, it's that simple. hope this will help someone out there.
This thread is now locked and can not be replied to.