Building a PC - power cords mixed up...

  MJC8917 12:54 10 Aug 2012
Locked

Hi guys,

I've built my pc now and I've installed all of the components. But I did the very foolish thing of unpacking the power cables for my PSU and monitor, and now I'm having trouble seeing which is which.

I've looked underneath what I think is the psu(Corsair TX750) plug and the fuse says "13A". I had a look at the one I think is the monitor(Asus PA238Q) and that says "13A" too!

The only difference I can spot between them is that on one of them it says "SP-62" on the plug head, and on the other it says "SP-60", whatever that means. There also seems to be a number on the plug head too in a circle which says 12, whereas on the other it says 9.

What do you guys think? Do you think I'd be safe to use these cables as they are?

Thanks in advance!

  KRONOS the First 13:01 10 Aug 2012

Are you talking about this type of cable? Kettle cable. If so I have a bag full of them and if I need one I just plug one in. I suppose you could check the fuse in the plug end but other than that you should be fine.

  MJC8917 13:07 10 Aug 2012

Thanks Chronus!

Yeah that's exactly it, with three pins in the socket.

Phew! Thanks for your help :D

  Fruit Bat /\0/\ 14:59 10 Aug 2012

Yes either cable will work however it is annoying when they come with a 13a fuse.

The fuse is there to protect the equipment and a monitor will not be protected by a 13A fuse as it draws very little power, I doubt if you PC needs a 13A fuse either.

What is the PSU power rating? i.e. 750W = volts x Amps

amps = w/v = 750/220 = 3.4 amps therefore fit a 5 amp fuse.

  rdave13 15:56 10 Aug 2012

*Fruit Bat /\0/* I'll have to check on those fuses. Never even thought about it.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

Best Black Friday Deals 2017

How modern book design was influenced by illustrated manuscripts

Best Black Friday Apple Deals 2017

Les meilleurs logiciels de montage vidéo gratuits (en 2017)