Bios Problem

  Peachy boy 14:19 01 Aug 2007
Locked

Hi I was trying to restore my packard bell imedia 1503 pc to its factory state, the manual told me remove all hardware that wasnt there when I bought the pc. I had to go into bios and change the display to onboard I changed the settong from pci\peg to peg\??? (realy sorry i cant remember what the other word was) but now I cant get a display from any plug (2 on gpu and 1 on mobo) Does any one know how I can get a display again.

I will continue to work on the problem any help appreciated Thanks Alan

  dan* 14:25 01 Aug 2007

You have no display now?

If so, remove the motherboard battery for 30mins and see if it has reset the bios. Or if you know were the bios jumper is, usually JP1, short it and restart the computer.

Only remove or short thejumper with the machine off and the power leads removed from the power sockets.

  dan* 14:29 01 Aug 2007

The jumper settings are click here

You use the jbat1 jumper. Short it for ten seconds and replace to normal position.

  Peachy boy 14:45 01 Aug 2007

The Problem Has been solved oboard dispaly is working thanks again

  Peachy boy 14:46 01 Aug 2007

I took the battery out for 20 min thanks again

  dan* 15:19 01 Aug 2007

Good.

This thread is now locked and can not be replied to.

Elsewhere on IDG sites

OnePlus 5 review

Best of the Grad Shows 2017: UAL Central Saint Martins

MacBook Pro 15-inch (2017) review

Comment connecter un MacBook à une TV ?