Hello - I have a new Mesh system and you may have seen a few of my threads about the company. I think I now have this machine under control, with some help from Mesh support and a weary postman. However I must draw to the attention of recent purchasers of systems with the Asus K8V deluxe mainboard a possible misconfiguration of the memory chips. This problem came up at some other forums, so I do not take any credit for this nor any pleasure in revealing it. It stems from using slots 2 and 3 on the board,instead of slots 1 and 2. This effectively runs the memory @ 200Mhz instead of 400Mhz so I am led to believe. I do know that my 3D score was 12269 before I changed the memory from 2 and 3, to 1 and 2 to 22500 afterwards. If anybody has any doubts I would contact Mesh, because these changes are fairly recent on the newer Mainboards. Mesh may be in the process of contacting affected people, but I do not know if this is the case.
Hello- Mesh have promised to use slots 1 and 2 in the future. However a quick look inside will tell you as slot 1 is blue and 2 and 3 are yellow. If it looks wrong have a chat with support, but it is simple to remedy.